Pauline on USB (ETH)
Since the 12/26/2021 update, Pauline can be connected through USB (RNDIS function).
This new version also creates an MTP drive.
Use a USB cable to connect the micro USB type B connector of the DE10-Nano card to a USB type A port of a computer.
In this mode of operation the IP address of Pauline is :
IP address : 192.168.168.1
The date and time are not automatically sent by the network anymore and has to be set manually every time power has been restored:
Open a Terminal (
datecommand to display the current system date and time.
To change the date, the command syntax is as follows:
MM = two-digit month
DD = two-digit day
HH = two-digit hour
mm = two-digit minutes
YY = two-digit year
Once installed, an RTC module can save the date and time automatically.
Pauline with an RTC module from the MiSTer project and a 3D-printed PETG screen support